Profitieren Sie von unseren Schul-/Behörden Rabatten
Pololu HP motor driver (24v23) 23A MOSFET H-bridges motor driver bi-directional control DC motor 5.5V to 40V current 25A

Item number: PO-1456

Very compact single DC motor driver
5.5V up to 40V
23A continuous load without heat sink, with 37A

Category: Controllers, Processors


70,77 €

including 16% VAT. , plus shipping (Standard)

Short supply

Shipping time: 2 - 3 workdays



The Polulu HP Motor Driver (24v23) 23 A is a standalone MOSFET H-Bridge motor driver that allows bidirectional control of a high performance ruggedized DC motor. The board has a compact size of 1.8x1.2 inches and supports a wide voltage range from 5.5 to 40 V. In addition, the motor driver is efficient enough to deliver a continuous 23A continuous load without the need for a motor driver. Furthermore, the HP Motor Driver outputs an analog voltage proportional to the motor current. An additional control input allows for additional boost operation to drive and brake, which is provided by the other high performance motor drivers from Polulu.

The absolute maximum voltage for this motor driver is 40V. Under normal operating conditions, the ripple voltage on the supply line may increase to a maximum voltage greater than the average or expected voltage. A safe maximum voltage is about 34V. Please note that charged battery voltages can be much higher than rated voltages. The manufacturer Polulu therefore recommends that the maximum rated voltage should be 28 V, as long as suitable measurements are taken to limit the peak voltage.

The versatility of this motor driver makes it suitable for a wide range of currents and voltages: the motor driver can deliver a continuous current of up to 25A with a size of only 1.8x1.2'' and no required bulkhead. With the addition of a Kühlk, the motor driver can drive a motor with a continuous current up to 40 A.

For more detailed information see product pages from Polulu.


Shipping weight: 0,01 Kg