These tiny DC gearmotors with rust are available in a wide range of ratios from 5:1 to 1000:1 and with five different motors: Powerful 6 V and 12 V motors with long-life carbon rust (HPCB) and powerful (HP), medium power (MP) and low power (LP) 6 V motors with long-life precious metal rust. The 6 V and 12 V HPCB motors offer the same power at their respective rated voltages, with the 12 V motor consuming only half the current of the 6 V motor. The 6 V HPCB and 6 V HP motors are identical, with the exception of their Bürsten, which only affect the life of the motor.
With the exception of the 1000:1 gear versions, all micrometal gearmotors have the same physical dimensions, so one version can be easily replaced by another when your design requirements change.
Note: Overtightening or overloading gearmotors can greatly shorten their service life and even lead to immediate damage. The recommended upper limit for the instantaneous torque is 2.5 kg-cm (35 oz-in) for the 380:1 and 1000:1 gear units and 2 kg-cm (25 oz-in) for all other ratios; we strongly recommend keeping the applied loads well below this limit. A standstill may also result in rapid (possibly in seconds) thermal damage to the motor windings and Bürsten, especially in the high power motor versions (HP and HPCB); a general recommendation for the operation of a DC motor with a standstill current is 25% or less of the standstill current.
|Shipping weight:||0,02 Kg|
|Product weight:||0,01 Kg|