Profitieren Sie von unseren Schul-/Behörden Rabatten
Phidget 1018_2B Interface Kit 8/8/8 Interface Board Reading of digital inputs, connection of sensors, control outputs

Item number: 21659

The workhorse of Phidgets. Connect sensors, control outputs and read digital inputs.

Category: Controllers, Processors

Mini USB Cable Length

184,64 €

including 16% VAT. , plus shipping (Standard)

Available now!

There are variations of this item. Please select the variation you wish.


Analogue input

>The analogue inputs are used to measure continuous voltage outputs generated by various sensors such as temperature, humidity, position or pressure. Phidgets offers a variety of sensors that can be plugged directly into the board using the cable supplied with the sensor. Sampling rates can be set to 1ms, 2ms, 4ms, 4ms, 8ms and multiples from 8ms to 1000ms.
Further information on these inputs and their connections can be found in the Analog Input Primer.

Digital inputs

>The digital inputs have a hardware filter for digital inputs to prevent false alarms due to electrical interference. They can be used to communicate the status of devices such as push buttons, limit switches, relays and logic levels.

Digital outputs


>The digital outputs can be used to drive LEDs, solid state relays (such as the 3052 SSR Relay Board), transistors; in fact anything that accepts a CMOS signal.

Included in the package:

3018 - Mini-USB cable 180cm
One hardware mounting kit (4 screws and nuts (M3), 4 plastic spacers)

Board

Control üVia USB
API Object name DigitalInput, DigitalOutput, VoltageInput, VoltageRatioInput, VoltageRatioInput
USB voltage min. 4.6 V DC
USB voltage max. 5.5 V DC
Current consumption min. 13 mA
Current consumption max. 500 mA
Available external current 487 mA
Recommended cable cross-section 16 - 26 AWG
USB Speed Full Speed Full Speed
Operating temperature min. 0 °C
Operating temperature Max. 70 °C

Voltage input

Number of voltage inputs 8
Voltage inputresolution 10 Bit
Input impedance 900 kΩ
Input voltage min. 0 V DC DC
Input voltage Max. 5 V DC
5V Reference error Max. 0.5 %.
Voltage input refresh rate Min. 1 Samples/s
Voltage input refresh rate Max (4 channels) 1000 Samples/s
Voltage input refresh rate Max (8 channels) 500 Samples/s
Voltage input refresh rate Max (WebService) 62.5 Samples/s

Digital input refresh rate Max (4 channels) 1000 Samples/s
Voltage input refresh rate Max (8 channels) 500 Samples/s
Voltage input refresh rate Max (WebService) 62.5 Samples/s

Voltage input refresh rate Max (4 channels) 1000 Samples/s
Voltage input refresh rate Max (8 channels) 500 Samples/s
Voltage input refr;nge

Number of Digital Inputs 8
Pull-up Resistor 15 kΩ
Low Voltage Max (True) 900 mV DC
High Voltage Minimum (False) 4.2 V DC
Low Voltage Output öser Länge Min 4 ms
High Voltage Output Läser Länge Min 15 ms
Digital Input Voltage Max. ± 15 V DC
Digital input update rate 125 samples/s

Digital outputs

Number of digital outputs 8
Serial resistance 300 Ω
Digital output current Max. 16 mA
Digital output voltage Min 0 V DC Min 0 V DC
Digital output voltage Max. 5 V DC

Translated with www.DeepL.com/Translator
Contact