Schul-/Behörden Rabatte    Partnerprogramme    30 Tage Geld-zurück-Garantie
OpenCM9.04-C Open-Source-Controller 32-Bit ARM Cortex-M3 3-PIN-Anschluss für Dynamixel Steuerung JTAG / SWD Terminal

Artikelnummer: 902-0084-040

Das Open CM9.04 C ist ein Open-Source-Mikrocontroller von ROBOTIS, der mit dem 32-Bit-ARM-Cortex-M3-Prozessor betrieben wird. Jedes 3-polige DYNAMIXEL-Servo mit dem Kommunikationsprotokoll TTL kann mit dem OpenCM9.04-C verwendet werden. Mit viel Rechenleistung ist diese Steuerung eine gute Wahl für den Roboterbau mit mehreren Servos!

Kategorie: Controller, Prozessoren


24,99 €

inkl. 19% USt. , zzgl. Versand (Standard)

momentan nicht verfügbar


OpenCM9.04 is an open-source controller that runs under 32bit ARM Cortex-M3.
All hardware and software are disclosed.

Uses an exclusive 3PIN connector to control the ROBOTIS DYNAMIXEL XL-320.

Uses USB Cable (Micro-B) to download programs onto the board.

Users can choose between using the ROBOTIS RoboPlus software or ROBOTIS OpenCM IDE.

JTAG / SWD terminal can be used to run commercial developmental programs.


Caution:
The OpenCM 485 Expansion Board, which supports TTL and RS-485, can be used to control all types of DYNAMIXEL's, such as AX, MX, and Pro series.

When using the OpenCM9.04-C to control the DYNAMIXEL, a separate power supply must be supplied to the DYNAMIXEL.

RoboPlus can be used when the board is connected to the PC via USB Downloader LN-101 or BT-210.
(PC must have Bluetooth device for Bluetooth connection)
ROBOITS OpenCM IDE can be used only via Micro 5PIN USB Cable.


The RoboPlus and ROBOTIS OpenCM IDE CANNOT be used simultaneously.

The firmware must be changed depending on the software to be used.
(Please refer to the e-Manual for changing the firmware)

Package Contents:

  • Controller OpenCM9.04_C 1x
  • 1x20 PIN Header Socket 2x
  • Socket 1x20 BOX Header Socket 2x
  • USB Downloader Cable (Micro-B) 1x
  • Instruction Manual 1x


Hardware Specifications :

  • CPU: STM32F103CB (ARM Cortex-M3)
  • Operating Voltage: 5V ~ 16V (USB 5V, DYNAMIXEL 7~12V)
  • Recommended Voltage: 5V for USB, 7.4V for DYNAMIXEL XL series (LB-040 3.7V x 2); 485 Expansion Board is recommended to control DYNAMIXELs requiring over 12V.
  • External I/O: 26
  • Timer: 8
  • Analog In(ADC): 10 (12bit)
  • Flash: 128 Kbytes
  • SRAM: 20 Kbytes
  • Clock: 72Mhz
  • USB: 1 (2.0 Full Speed)
  • CAN: 1
  • USART: 3
  • SPI: 2
  • I2C(TWI): 2
  • Debug: JTAG & SWD
  • TTL port (3Pin): 4 (XL-320 exclusive)
  • External Sensor(5 Pin): 4 (Compatible with ROBOTIS Sensors)
  • Size: 27 mm X 66.5 mm
  • Weight: 13g


Compatible Products:

DYNAMIXEL : XL-320
Wireless Communication : ZIG-110A, BT-110A, BT-210
External Sensor: Robotis Sensors


Control Environment:
Exclusive Software [ROBOTIS OpenCM IDE] : Download
Exclusive Software [RoboPlus] : Download


Downloads:

 


Versandgewicht: 0,04 Kg
Kontaktdaten