This is a simple 2-phase hybrid stepper motor. It is characterized by a high torque of 3.5 kg. It is used in most CNC machines or 3D printers such as Makerbot and Ultimaker. If you want to make your own CNC or 3D printer, this motor is the most suitable. Normally a CNC machine requires 3 motors and a 3D printer even 4.
This motor has been continuously tested by DFRobot Lab for 3 months. After testing more than 10 different stepper motors, they finally have one that meets their quality and price requirements.
The motor comes with a 4-pin JST connector that is compatible with the Ultimaker Control Board.
SPECIFICATIONS
model no.: 42BYGH40-1.8-22A
step angle (degrees) : 1,8
2 phases
nominal voltage: 3,4V
current: 1.7A/PHASE
Holding torque: 3.5kg*cm (48.6 oz/in)
Latching torque: 180g*cm
5mm (0.2") Diameter of drive shaft
Winding resistance: 2±10% Ω/PHASE
Winding inductance: 2±20% mH/PHASE
Maximum flux coupling: 1.8 Vs.
Maximum detent torque: 0.016 N.M.
Total torque (kg.m.m.m.m): 3.5 Kg.m.m.m.
Total friction (kg.m/s): 4 Kg.m/s
Step angle accuracy: ±5% (full step, without load)
Temperature rise: 80°C Max.(Nominal current, 2 phases on)
Ambient temperature: -20°C~+50°C
Insulation class: B
Lifetime: 6000 hours
Cable length: 50cm
Weightness: 270 grams
Gröe:42x42x40mm (1.65x1.65x1.65x1.57")
Shipping weight: | 0,40 Kg |
Product weight: | 0,27 Kg |